Mallofusa Car HUD Display, 5.5 Inch Screen AP1 OBD2 & GPS Gauge HUD HD Head Up Display,Speed KM/H MPH RPM Water Temperature Voltage Car Digital Speedometer for All Vehicles with OBD2 Interface Plug

OBD+GPS Gauge, for cars with OBD2 interface and protocol. Please check your car has OBD2 interfaceSpecification:Display Interface: speed, engine RPM, battery voltage, fuel consumption, coolant temperature, turbo, oil temperature etcWarnings related to exceeding the programmable speeds or RPM, Clear fault codeTwo installation methods: A-pillar-trim install or put on the dashboardFeatures:1, New Updated HUD car display, OBD2+GPS Smart Gauge2, HD LED display, the KM/H and MPH display interface can be free switched3, The default mode is OBD2 mode,If your car don't have OBD2 protocol,please switch to GPS mode4, The Smart Gauge connects to the vehicle via OBD cable, plug and play5, OBD+GPS system with multi-function:OBD mode: speed/clock/RPM/water temperature/voltage/fuel consumption/driving time/driving distance/turbo pressure/acceleration test/brake test/clear fault code/oil temperatureGPS mode: speed/clock/driving time/satellite number/altitude/driving distance6, 8 kinds display interface:Simple function; Speed; Multi-function; 6 kinds information; Turbo pressure(Please note: if the car don't have turbo, then there's no data); Acceleration test(The time from 0 km/h to 100 km/h); Brake test(The time takes when step the brake until car stop); Data stream7, When the speed is switched to MPH per mile, the water temperature will be automatically switched to Fahrenheit degrees, the single driving distance will also be automatically switched to Miles, and the fuel consumption will also be automatically switched to gallons MPGEasy to install: 1, Turn the ignition off, connect the OBD cable to vehicle OBD2 interface2, Connect the OBD cable to the OBD interface on Smart Gauge3, Hide the OBD cable in A-pillar. Turn the ignition on, then it can workPackage Included:1 x OBD+GPS Gauge1 x OBD2 cable1 x Velcro tape1 x Manual

• CLEAR DISPLAY: Mallofusa New Updated HUD, OBD+GPS Gauge, It's the first one on the market that can install on A-pillar-trim, LED display more safe for driving. OBD and GPS mode can display at the same time by switch the display interface, GPS mode can work for all cars. Display the information and read it easier while driving.
• OBD+GPS SYSTEM: Display vehicle data such as speed, engine RPM, battery voltage, fuel consumption, coolant temperature, turbo, oil temperature etc. Warnings related to exceeding the programmable speeds or RPM. Very clear in daytime and night, HUD will power on/off with engine on/off, Easy for use. display the data clearly whether day or night.
• EASY TO INSTALL: A-pillar-trim install or put on the dashboard. The Smart Gauge connects to the vehicle via OBD cable, plug and play. Can display speed, water temperature, voltage, fuel consumption, clock, distance travelled per trip, time travelled per trip, oil temperature, intake pressure(psi). Muti reminders help you avoid the accidents and keep your driving safely.
• MULTI REMINDERS AND ALARM: 8 kinds display interface. The display interface can be free switch. Alarm function, improve driving safety: speed alarm/ high water temperature alarm/ low voltage alarm/ fatigue driving alarm/ engine fault alarm/ overspeed alarm/ gear shift reminder/ eliminate fault code.When the speed is switched to MPH per mile, the water temperature will be automatically switched to Fahrenheit degrees, the single driving distance will also be automatically switched to Miles
• PLUG AND PLAY: Car HUD is only suitable for cars with OBD2 interface.Plug-and-play HUD.It takes only 3 steps to install through the user manual on your car.And when you start your car,the HUD gets on automatically and starts to work without any other operation.